Schwalbe SV17E 37/50-622 Aerothan Allround Endurance Race Hose 61 gAerothan is a material that completely redefines the bicycle tube: extremely light highly puncture-resistant and designed for the lowest rolling resistance.Aerothan tubes are about 40% lighter compared to Schwalbe Extralight tubes made of butyl. In addition to an extremely low rolling resistance at tubeless levels and has increased puncture protection.Aerothan tubes consist of 100% thermoplastic polyurethane (TPU) including the valve and are therefore fully recyclable. Like all Schwalbe tubes Aerothan tubes may be returned to Schwalbe at no cost using the tube recycling program. The material of used tubes is recycled to make sealing or insulation material.The Plus versions of these tubes are thicker for better air retention and have further increased puncture resistanceAerothan Allroad TubeThe Aerothan Tube Allround is the extremely light and absolutely reliable high-end tube for urban cycling and touring.Compared to Schwalbe standard tubes it reduces a bicycleâs weight by about 180 g â this in combination with low rolling resistance makes cycling even more enjoyable. Cyclists on long nature rides can rely on excellent puncture protection. Even without remembering to use a pump before a ride the Aerothan Tube Allround can handle it: Also at low air pressures it maintains shape and ensures a safe ride on the trail.AdvantagesExtremely heat resistantOffers a stable ride even at low air pressures Minimal rolling resistance - maximum driving dynamicsEasy mounting without slipping or jammingConsistently light100% RecyclableMade in GermanyRepair and tyre pressureUse Schwalbe Glueless Patch classic patches do not stick to the TPU material.No roughening required Do not use puncture sprays Do not use chemical cleaners Tire pressure can be based on the recommendations for a tubeless systemMinimum pressures engraved on the Schwalbe tires are correct according to butyl tubes. These values can be undercut when using Aerothan Check the maximum rim pressure if it is lower than the maximum tire pressure IntallationWhen inflating the Aerothan tube outside the tire it should not be inflated to more than 0.3 barAvoid over-inflation and over-rapid inflation outside the tire as the material expands with a delay.Inflating too quickly can lead to bubbles forming on the Aerothan tube the tube can then no longer be usedInflation with CO2 cartridge is only recommended when fully installedRe-installation is possible with the same or larger tire width (Note size information on the packaging)When converting from Tubesless to Aerothan: Thoroughly clean tire and rim and remove residues of sealing milkAerothan tubes are compatible with rim tapes
This product would be ideal for endurance race bike riders.
